|oki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices|
to suit a wide range of applications in the testing of electronic components.
The 3504 series are dual-band capacitance meters suited for large-capacitance
MLCC inspections using a constant voltage.
Model No. (Order Code)
This product is not supplied with measurement probes or test fixtures.
• High speed measurement of 2ms
|Measurement parameters||C (capacitance), D (loss coefficient tan δ)|
|Measurement range||C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99999|
|Basic accuracy||(Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016|
|Measurement frequency||120 Hz, 1 kHz|
|Measurement signal level||100 mV (3504-60 only), 500 mV, 1 V rms|
CV 100 mV Measurement range: up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 500 mV Measurement range : up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz)
CV 1V Measurement range : up to 70 μF range (Source frequency 1 kHz), up to 700 μF range (Source frequency 120 Hz)
|Output impedance||5Ω (In open terminal voltage mode outside of the CV measurement range)|
|Display||LED (six digits, full scale count depends on measurement range)|
|Measurement time||2 ms (Typ. value. Depends on measurement configuration settings)|
|Functions||4-terminal contact check function (3504-60 only)|
BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C, GP-IB (3504-50, 3504-60)
|Power supply||Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max.|
|Dimensions and mass||260 mm (10.24 in) W × 100 mm (3.94 in) H × 220 mm (8.66 in) D, 3.8 kg(134.0 oz)|
|Accessories||Power cord ×1, Instruction manual ×1, Spare fuse ×1|