|Earthing or grounding of electrical equipment is essential to maintain|
safety, protecting lives, as well as prevent damage to equipment.
The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole
ground resistance tester with large, easy-to-read display, highly
sensitive earthing rods, and innovative cable winder that
significantly reduces the amount of time needed to complete earth
Model No. (Order Code)
CAT IV 100 V, CAT III 150 V, CAT II 300 V
• IP67 protected – top of the industry
|Dustproof and waterproof enclosure for robust performance in the field|
IP67 dustproof and waterproof
Since the FT6031’s enclosure is designed to keep out dust, it can be used with peace of mind in settings where it would be exposed to mud and dust. And if the instrument gets dirty, it can be rinsed clean with water.
|Using a grounding resistance meter: Two- and three-pole methods|
You can select from two grounding resistance measurement methods (two-pole or three-pole).
|Dramatically faster measurement setup thanks to superior ease of use and digital operation|
The FT6031’s supplemental grounding rods are thinner than previous products, making it easier to insert them into, and remove them from, the ground. The rods are made of rigid, corrosion-resistance stainless steel. In addition, the allowable resistance of the supplemental grounding electrodes has been increased by a factor of 10. This enhancement eliminates the inconvenience of setting and resetting the rods over and over again when the allowable resistance is exceeded, for example in dry soil conditions.
|Digital grounding resistance meter featuring easy operation|
The FT6031 is extremely easy to operate: just press the MEASURE key.
|Newly developed cord winders keep measurement cords from getting twisted or tangled|
When measuring grounding resistance, it takes time to put away the long measurement cords.
|Measurement system||Switchable between two- and three- electrode methods|
|Measurement range||20 Ω (0 to 20.00 Ω)||200 Ω (0 to 200.0 Ω)||2000 Ω (0 to 2000 Ω)|
|Accuracy||±1.5 %rdg. ±8 dgt.||±1.5 %rdg. ±4 dgt.||±1.5 %rdg. ±4 dgt.|
|Earth voltage||0 to 30.0 Vrms, Accuracy: ±2.3 %rdg. ±8 dgt. (50/60 Hz), ±1.3 %rdg. ±4 dgt. (DC)|
|Dustproof and waterproof||IP65/IP67 (EN60529)|
|Power supply||LR6 Alkaline battery ×4|
Possible number of measurements: 100 times
(measurement conditions: three-electrode method, measuring 10 Ω)
|Dimensions and mass||185 mm (7.28 in)W × 111 mm (4.37 in)H × 44 mm (1.73 in)D, 570 g (20.1 oz)|
(including protector and batteries)
|Accessories||Auxiliary earthing rod L9840 (2 piece set) ×1, Measurement cable (black 4 m) L9841 ×1, Measurement cable (yellow 10 m, equipped with winder) L9842-11 ×1, Measurement cable (red 20 m, equipped with winder) L9842-22 ×1, Carrying case C0106 ×1, Protector ×1, LR6 Alkaline battery ×4, Instruction manual ×1|